APDT-00三极放电管全自动打印机的研制

介绍了新近研制的APTD - 0 0三极放电管全自动打印机的结构特点及整机设计的关键技术 ,阐述了自动上料机构、打印机构和控制电路的设计     

Kinetochemical and morphological differentiation of ettringites by the Le Chatelier-Anstett test

In this research, former XRD experiments have been verified by Le Chatelier-Ansttet (L-A) test. For this purpose, 28 cements consisting of 7 Portland cements and 21 blended cements containing 20%, 30% and 40% metakaolin have been submitted to the Le Chatelier-Anstett (L-A) test for 2 years. With all these cements, L-A specimens were manufactured and a direct parameter was measured for these specimens: increase in diameter, Δ∅, or diameter growth. Other complementary determinations were chemical analysis, XDA patterns and SEM of ettringites and specific properties of some cements tested. The experimental results have borne out that the formation rate of the ettringite formed from the reactive alumina, Al₂O₃^r−, present in pozzolans must be considerably higher than the formation rate of the ettringite from C₃A and much higher than the ettringite from C₄AF, both present in OPC. Owing to this, these ettringites were proposed being named “rapid formation” (ett-rf), “slow formation” (ett-lf) and “very slow formation” (ett-vlf) ettringites, respectively. On the other hand, these experimental results have also shown that the ett-rf has a much smaller size than the ett-lf (this is a direct consequence of the aforementioned conclusion); that almost all the alumina, Al₂O₃, present in M pozzolan must be regarded as being “reactive,” Al₂O₃^r−, or at least, the greatest part; that the detrimental effects derived from gypsum attack are shown much earlier in these POZC than in their plain OPC and, to such an extent, that this aggressive action can be described as rapid gypsum attack; and that none of the 21 POZC tested can be described as high nor moderate sulphate resistant cements according to L-A test.     

Comments on “Equivalence of characterizations of fixed models”

In this note we present a proof to the conjecture given in the above paper, and therefore establish the equivalence of characterizations of fixed modes for the general case.     

Integrating scheduling and control functions in computer integrated manufacturing using artificial intelligence

Proper integration of scheduling and control in Flexible Manufacturing Systems will make available the required level of decision-making capacity to provide a flexibly-automated, efficient, and quality manufacturing process. To achieve this level of integration, the developments in computer technology and sophisticated techniques of artificial intelligence (AI) should be applied to such FMS functions as scheduling. In this paper, we present an Intelligent Scheduling System for FMS under development that makes use of the integration of two AI technologies. These two AI technologies — Neural Networks and Expert Systems — provide the intelligence that the scheduling function requires in order to generate goodschedules within the restrictions imposed by real-time problems. Because the system has the ability to plan ahead and learn, it has a higher probability of success than conventional approaches. The adaptive behavior that will be achieved contribute to the integration of scheduling and control in FMS.     

An Optimal Model and Algorithm of Distributed Information System

Distributed information system makes itself be placed in changing file storage position according to the users＇ request pattern. In this paper, we rebuild the model for a management system to turn the process of file managing into a 0-1 programming problem, and present a new individual form to improve the operating efficiency. Aiming at the model, we define a neighborhood span to make segmentation for searching space by using the fitness, based on the region contraction algorithm, present a new evolution algorithm which has the capability of self-adaptively generating new individuals, and ultimately solve the management problem of the distributed file system.     

GaAs器件工艺中等离子刻蚀及计算机辅助监控技术研究

用Ｎ２气和ＮＦ３反应气体，在较低的刻蚀功率下实现了用薄正性光刻胶ＡＺ１５１８作掩模，均匀、快速刻蚀ＳｉＯ２，ＳｉＯＮ，Ｓｉ３Ｎ４，ＷＮ，Ｗ等材料的等离子刻蚀技术。利用到蚀过程中射频参数的变化和计算机技术，将射频参数的变化在计算机屏幕上实时显示，实现了计算机辅助监控和终点检测技术。     

应用并行技术实现CAD／CAM的高度集成

传统的CAD/CAM系统由于设计思想本身的局限性,其内部只能达到一种松散的基于数据交换的低水平的集成,产品的设计方法也不符合工程技术人员的设计思路。本文提出了基于全耦合的单一数据模型的并行CAD/CAM系统设计思想,使得CAD/CAM系统内部达到以数据共享为基础的高度集成。并行CAD/CAM系统充分体现了工程技术人员的思维方式及产品设计过程的反复性和协调性。此外,文中还提出广义参数化设计的新概念,它与特征设计方法的有机结合保证了产品模型的完整性和产品设计过程的同步性。特征共享是实现CAD和CAM集成的关键因素。并行CAD/CAM系统应用面向对象软件设计思想,实现了复杂数据模型的内部封装,并为数据模型和功能模块之间提供简单直观的界面。面向对象设计方法是开发并行CAD/CAM系统的有效手段。     

中国新移动运营商3G发展策略

通过对3G的市场分析、技术分析、制式选择关键因素分析和经济分析,得出了中国新移动运营商3G的发展策略。无论从基于频率资源与制式关系的考虑,基于选择3G主流制式的考虑,还是从基于利用非对称频段资源、采用TD-SCDMA混合组网的考虑,对新的运营商来说,采用WCDMA来建设移动通信系统都是必要和有利的选择。     

LS SIMD微处理器中的三组指令并发执行的设计

文章介绍了LS SIMD微处理器中实现三组指令并发执行的可能性和必要性，分析了三组指令并发执行给流水线带来的影响，并讨论了控制逻辑对三级指令并发执行的控制及其实现形式。